Giant Pansy / Guinevere Fairy Wings in Aurora with Gold Veins, Listing 2/26 at 2pm PST

This one set of giant Pansy Guinevere wings is ready to ship!

This set will be available starting at 2pm PST on Saturday, 2/26/22. They will be $875 plus shipping.

This should have been posted yesterday but, honestly the war in Ukraine as well as the illegalization of trans kids in Texas really tipped my depression lower. We also had a death among my partner's relatives due to covid so it's been a stressful week, but, I've gotta sell wings if I'm to pay the rent. Also note that I've brought the prices down on some of the remaining wing jewelry currently in my shop.

The Aurora film is a new addition to the clear iridescent options, this one has a lot more green shine than the clear Diamond Fire, which has more yellow & orange shine in it.
The undertone is a pinkish color. Below is a back view with less reflection.

We had to move stuff out of the room just to get a shot of the wings without anything else in the frame, they’re huge!
They are widest between the tips of the tails, which measure 65 inches across, almost 5 and a half feet wide so you’ll want to be sure you have PLENTY of room to flutter around! They are big enough that it was too difficult to get a side view like I usually get especially since part of this little space in the dining room is now my partner’s work from home computer station.
These are also convertible so you can remove the bottom screw and have them in the down position but I can’t recommend the rubber washer assembly for posing, as they are possibly too big to stay in position that way.

Remember, they won’t show up on the flash sale page until 2pm PST on 2/26.
Need a link? Here ya go! https://fancy-fairy-wings-things.myshopify.com/collections/flash-sales

Want early notifications of new items and flash sales, behind the scenes, tutorials and digital content? Subscribe to my Patreon here: https://www.patreon.com/faeryangela

Fairy Wing Jewelry Flash Sale Saturday, 2/12 at 1pm PST

The faux opal jewelry is complete! Made with polymer clay and metal wing veining, topped with clear resin.

The veining is made from thin brass and nickel silver, and all are my original wing designs that you won't find anywhere else.

I'll be selling 1 or 2 of the faux opal brass ones as a set with both earrings and necklace for $144, and the necklace on its own will be $79.

One of the left-facing faux opal brass Colette wing necklaces will be marked down as irregular because it had some excess glue around the brass bail causing it to be a bit dulled and the area immediately surrounding it a little scuffed, so that's why that close-up is there. It will be $59

The silver Colette wing necklaces will also be priced slightly lower than the brass ones as there is some scuffing near the top of the pendant from an attempt at a glue-on bail that did not work out and had to be scraped off, though it's mostly hidden by the star charms. They will be 60 each.

They're still special in their own way though because they're from the very first run when I made the veins a lot thinner and they were all kept in the design. But, because they were too thin for the material, some of the smallest veins were lost or had breaks in them so the new ones will look like the brass versions you see here - thicker veins and not quite as many of them.

One of the Datura faux opal & brass necklaces will also be slightly discounted at $55 due to it having some tiny bubbles in the resin, and some of the polymer clay ended up covering a few vein areas when I embedded the metal into the clay. It is, however, the sparkliest one! The others will be $69 each. The left facing one was photographed at night under a bright light because I forgot to do it with the rest earlier, oops! However, I do like how the spot light brings out even more of the glimmer in the ‘opal’.

The pinkish glittery resin Nightshade necklace will also be sold with glitter resin Nightshade earrings to make a set for $65.

The multi-color glitter earrings will be marked down as irregular for $25 since both earrings face right, and the Datura glitter resin and silver earrings will be $25 each. That one set of the thin-veined Colette earrings with the magenta-violet shimmer resin will be $18, they have a few bubbles as you can see in the photo but they are also one of those rare ones that won't be made again.

Shipping is additional.

You can see them in motion on my Instagram Reels:
https://www.instagram.com/reel/CZXsnd5BnrA/?utm_source=ig_web_copy_link
https://www.instagram.com/reel/CZ0GvhmPJJI/?utm_source=ig_web_copy_link

Again, these all will list on February 12 at 1pm PST, here: https://fancy-fairy-wings-things.myshopify.com/collections/flash-sales

 If you’d like to further support me and have access to behind the scenes content such as process photos and video (coming soon) from the making of the faux opal wing jewelry, you can subscribe to my Patreon starting at only $1 here: https://www.patreon.com/faeryangela

Made-To-Order Fairy Wings Flash Sale Tonight at 8pm PST!

It will be small, but I’ll have just a few sets of made-to-order wings listing tonight, Feb. 8 at 8pm PST.
If you missed the Ivy wings, those are back in this batch.

Top photo is Ivy, the bottom row from left to right is Colette, Datura, and Pansy.

In this batch, you'll be able to choose the vein color as well as the film color, however the Colette veins can only be done in either black, white or silver at this time.
Frames are being cut now, but still need powder coating and all the rest. I also am waiting for this batch to complete a few new extra large wings for a theatre production, which will include extra large sizes of the Ellette, Aynia, Aquatica, which I haven't made in the XL size before.
So expect to see those offered before long and note that the orders from this sale will need a couple months for production, possibly longer if you choose a vein color I won’t be having coated for a while.

Need the Flash Sale page link? Here you go: https://fancy-fairy-wings-things.myshopify.com/collections/flash-sales

Remember that the new listings won’t show up until the start time at 8pm Pacific Standard Time.

I'm also going to be listing the faux opal fairy wing jewelry soon!
I don't have the date and time set yet, hoping to finish them today and do photos but the plan is to have them listed before the end of the week. I posted a short Reel video on Instagram here:
https://www.instagram.com/reel/CZXsnd5BnrA/?utm_source=ig_web_copy_link

I’ll be posting some behind the scenes of the process of making the faux opal for the wing jewelry on Patreon in the near future, with the $4 and up tiers getting a more in depth look with some tips. It may not be a full tutorial, but I’ll be pointing you to the existing ones I referenced as well as some of the key materials that made it look so much better than my first attempts.

Please consider subscribing, as it helps support me in creating new techniques as well as support for times when I’m unable to work due to injury or illness, etc. Subscriptions start at only $1 a month, you can sign up here: https://www.patreon.com/faeryangela

Another Flapping Fairy Wing Mechanism Listing! Tomorrow, 8am PST

That’s right, we’ll have another set of each of the flapping wing mechanisms listed last time, no assembly required!

One of each of the above colors will be available, in Sky Blue, Olive Green and Lavender.

We were initially worried about the slow response when we first released the kits that required assembly, however the first batch of fully assembled mechanisms sold within 1 minute of listing!
So going forward I’ll be offering the flapping mechanisms without assembly required - except to attach your wing panels.
Only my standard size Ethereal Collection convertible wings are guaranteed to work with them at this time, though you’re welcome to try to figure out your own attachment of older wing versions and we may come out with additional shaft attachments in the future.

So far there is just one speed, though we may come out with more in the future.

The on / off switch is on the power pack that’s connected by a cable to the mechanism so you’ll need a pocket or pouch somewhere to hold it.

They are all printed out of PLA, which can be sanded, primed and painted. Super glues should work well if you want to attach decorative elements to the cover.

Here’s the flash sale page link: https://fancy-fairy-wings-things.myshopify.com/

If you’d like to support me and my art further, making projects like this possible, please consider joining my Patreon.
You can become a Patron for just $1 a month, and $10 subscribers get the full tutorial for making your own flapping mechanism complete with 3D files to download! Subscribe here: https://www.patreon.com/faeryangela

Jordan put a lot of effort into engineering these and this would not have been possible without the bit of extra financial support from my patrons. Especially the last couple years during which the pandemic has made life even more of a struggle in so many ways.
Patreon patrons get the earliest news about new items & flash sales, as well as occasional tutorials, behind-the-scenes sneak peeks and digital downloads.
I hope to offer more, if life could get a bit less stressful and this pandemic could ease up.

Made To Order Wing Sale Tonight, Jan. 15 at 6pm Pacific!

It’s a small one, but the wing designs below will be made-to-order film color with gold veining.

I'll have one set of Pansy painted wings listed with the film & painted pattern made-to-order, with candy gold veining for $515. The first photo is an example of a painted set with gold veining.
I'll also have a couple un-painted wing sets, Nightshade and Goblin Princess - but if you really want those painted for an additional fee we can discuss adding that after ordering.

Those 2 wings will be in the $300 range roughly.

There will also be another flapping wing mechanism sale and with new colors! Since many of you had asked for completed mechanisms that don't require assembly, that's what the next sale will offer.
I think we'll do that one separately on Sunday, as wings and mechanisms can not be combined in the same package anyway. I'll update you when we've finalized the date and time.

Remember, the listings won't show up until 6 pm Pacific Time tomorrow, Saturday January 15th.
Here's the link so you're ready to go when the time comes: https://fancy-fairy-wings-things.myshopify.com/collections/flash-sales

If you’d like earlier access to sale announcements, behind-the-scenes content and tutorials, or just want to support my continued growth as an artist, join my Patreon here: https://www.patreon.com/faeryangela

New Fairy Wings Flash Sale Dec. 15 at 9pm Pacific!

On Wednesday, Dec. 15 at 9pm Pacific Standard Time, I’ll be listing the two wing sets below plus a set of Fauna and Ellette wings in repeat colorways.

This first set is the Goblin Princess, done here in the iridescent Absinthe film color, which is a sort of aquamarine, and silver veins. They’d be perfect for a frost faerie queen!

It may be winter but everyone has a favorite season - and many of us aren't ready to let autumn go yet since it seems to arrive late here and then BOOM! Winter is here!
So these Sintra fairy wings in the warm orange & greens of the Poison Apple film will be listing as well for all the fans of fall colors.
I can ship them out within the usual 1-3 business days after listing, however I strongly suggest having me ship them after the chaos of the Xmas shipping rush to avoid having to deal with lost or damaged packages.
Shoot me an email after purchase with your preference, and anything requiring fast shipping will require an additional fee.

I wish I had more to list by now but life threw me some curveballs recently and derailed some plans. I may yet have another small sale before the month is over but even if it happens before Xmas day, anything from a later sale will wait until after Xmas week to ship.

Need the link? Here you go! https://fancy-fairy-wings-things.myshopify.com/collections/flash-sales

Looking for fairy wing tutorials? Would you like to have the earliest sale notifications and access behind-the-scenes content, or just want to further support your favorite fairy wing artist?
Join my Patreon here: https://www.patreon.com/faeryangela

Small Ready-To-Ship Fairy Wing Sale Thursday Nov. 18 at 7am PST

That’s right, tomorrow I’m having a small flash sale at 7am PST! These painted Goblin Princess wings will be available.

I thought I might keep the painted Goblin Princess wings done in the Roller Bird paint pattern in magenta & blues, but the flapping wing kits are not selling as well as we'd hoped even after taking $100 off the price, so I'm going to let these go!

Along with a couple sets of the Elvina wings in Dark Crystal with copper veins, and possibly some repeat styles but I'm not 100% sure on that yet.

Flapping Fairy Wing Kits Listing Tomorrow, Nov 11 at 12pm Pacific!

That’s right, they’re finally here, easy to assemble flapping fairy wing mechanism kits so your wings can flutter!

Flapping Wing Mech Kit with Silky Lavender Cover

Three kits with cover included will be listed tomorrow, Nov 11 at 12pm Pacific Standard Time.
The soldering has already been done for you, the code is uploaded, the bearings & servo horns and magnets already installed.

Wing panels are not included.

These kits are made to work with my standard size Ethereal Collection wing panels. You might be able to make other wings work with it but I can’t guarantee it. In the future we may add a different servo attachment that will work more universally.

All the hardware is included but you will need some basic tools such as small wrenches (hex and / or Allen wrenches), screwdrivers, and a torch or heat gun to install the servos and mount the circuit boards to the back brace, and apply shrink wrap to some of the cords & wires. We’ll include instructions.
Below are photos of the opening in the cover with a ruler so you can check the clearance for your wings.

They will be listing for somewhere around $500, the wood one will be a little more as it involves more cleanup and has been sanded. The matte lavender one will be slightly reduced as there is a visible line going horizontally across the bottom half.
They will all have some slight imperfections such as tiny pock marks or rougher patches along areas that are more complex to print. Our 3D printer is pretty old by tech standards and we are looking at getting a better one or getting these printed off-site in the future.

They are all printed out of PLA, which can be sanded, primed and painted. Super glues should work well if you want to attach decorative elements to the cover.

Need a link? Go right to the Flash Sale page here: https://fancy-fairy-wings-things.myshopify.com/collections/flash-sales

Have a 3D printer and want to make your own mechanism yourself? Join my Patreon at the $10 Fairy Alchemist Tier for full instructions and 3D print files: https://www.patreon.com/faeryangela